View In:   ArcGIS Online Map Viewer

Name: Sanitary Control Valve

Display Field: AssetID

Type: Feature Layer

Geometry Type: esriGeometryPoint

Description: This layer contains all Sanitary Control Valves. Control valves are a set of valves that operate in special ways. There are three fundamental types of control valves: backflow control, air control, and altitude. A backflow control valve is a control valve designed to prevent water from flowing in the reverse direction. Essentially, backflow control valves allow flow in only one direction—the normal flow dirrection. Backflow control valves are open in the direction of normal flow and closed with the reversal of flow. Backflow control valves are commonly found near pump stations and reservoirs. Air control valves are control valves that are used to either relieve the system of trapped air or vacuums that may develop. Finally, an altitude valve is a control valve that controls water flow into a tower when the water level drops below a threshold. Altitude valves automatically shut off water flow when the water level in an elevated tank (or tower) reaches a preset elevation. A pressure reducing valve is a system valve with a horizontal disk for automatically reducing water pressures to a preset value. A pressure relief valve is a system valve that opens automatically when water pressure reaches a preset limit to relieve stress on a pipeline. Pressure relief valves are used to protect against rapid increases in pressure (i.e., water hammer). A pressure sustaining valve is a system valve that automatically sustains water pressures at a preset value. A pressure sustaining valve is similar to a pressure reducing valve but governs the pressure on the upstream rather than the downstream flow.Types of control valves represented include AirGap, AirControl, AirRelease, Altitude, BackflowControl, Combination, AtmosphericVacuum, DoubleCheck, PressureVacuum, ReducedPressureBackflow, RPZ, SimpleCheck, Vacuum, VacuumBreaker, and VacuumRelease.

Service Item Id: 0e6ded94bfc14517824ae51465194067

Copyright Text:

Default Visibility: false

MaxRecordCount: 2000

Supported Query Formats: JSON, geoJSON, PBF

Min Scale: 100000.0

Max Scale: 0.0

Supports Advanced Queries: true

Supports Statistics: true

Can Scale Symbols: false

Use Standardized Queries: true

Supports ValidateSQL: true

Supports Calculate: true

Supports Datum Transformation: true

Extent:

XMin: 511293.47080013074
YMin: 5966719.893884598
XMax: 516247.0074759404
YMax: 5968508.704589171
Spatial Reference: 26910  (26910)  VCSWkid(5713)  LatestVCSWkid(5713)

Drawing Info:

Renderer:
Simple Renderer:
Symbol:
Label: N/A
Description: N/A
Transparency: 0
Labeling Info:
Label Placement: esriServerPointLabelPlacementAboveRight
Label Expression: N/A
Use Coded Values: true
Symbol:
Color: [0, 0, 0, 255]
Background Color: N/A
Outline Color: N/A
Vertical Alignment: bottom
Horizontal Alignment: center
Right to Left: false
Angle: 0
XOffset: 0
YOffset: 0
Size: 8
Font Family: Arial
Font Style: normal
Font Weight: normal
Font Decoration: none

Min. Scale: 0.0
Max. Scale: 0.0

Advanced Query Capabilities:

Supports Statistics: true
Supports OrderBy: true
Supports Distinct: true
Supports Pagination: true
Supports TrueCurve: true
Supports Returning Query Extent: true
Supports Query With Distance: true
Supports Sql Expression: true
Supports Query With ResultType: true
Supports Returning Geometry Centroid: false
Supports Binning LOD: false
Supports Query With LOD Spatial Reference: false
Supports Percentile Statistics: true
Supports Having Clause: true
Supports Count Distinct: true
Supports Time Relation: false
Supports Sql Format: false
Supports Query Analytic: false
Supports Query With Current User: true

HasZ: false

HasM: false

Has Attachments: false

HTML Popup Type: esriServerHTMLPopupTypeAsHTMLText

Type ID Field:

Fields:

• OBJECTID ( type: esriFieldTypeOID, alias: OBJECTID, editable: false, nullable: false, defaultValue: null, modelName: OBJECTID )
• AssetID ( type: esriFieldTypeString, alias: AssetID, editable: true, nullable: true, length: 30, defaultValue: null, modelName: AssetID )
• LifeCycleStatus ( type: esriFieldTypeString, alias: LifeCycleStatus, editable: true, nullable: true, length: 20, defaultValue: ACT, modelName: LifeCycleStatus , Coded Values: [PRP: Proposed] , [ACT: Active] , [ABN: Abandoned] , ...2 more... )
• SubType ( type: esriFieldTypeInteger, alias: SubType, editable: true, nullable: false, defaultValue: 10, modelName: SubType )
• AssetOwner ( type: esriFieldTypeSmallInteger, alias: Owner of the Asset, editable: true, nullable: true, defaultValue: null, modelName: AssetOwner , Coded Values: [1: CPG] , [-1: RDFFG] , [-2: Private] , ...3 more... )
• AssetManager ( type: esriFieldTypeSmallInteger, alias: Manager of the Asset, editable: true, nullable: true, defaultValue: null, modelName: AssetManager , Coded Values: [1: Asset] , [2: Bylaw] , [3: Civic Facility] , ...21 more... )
• Location ( type: esriFieldTypeString, alias: Location, editable: true, nullable: true, length: 100, defaultValue: null, modelName: Location )
• InstallDate ( type: esriFieldTypeDate, alias: InstallDate, editable: true, nullable: true, length: 8, defaultValue: null, modelName: InstallDate )
• WaterType ( type: esriFieldTypeString, alias: WaterType, editable: true, nullable: true, length: 20, defaultValue: null, modelName: WaterType , Coded Values: [Treated: Treated Water] , [Combined: Combined Waste Water] , [Reclaimed: Reclaimed Water] , ...4 more... )
• Elevation ( type: esriFieldTypeDouble, alias: Elevation, editable: true, nullable: true, defaultValue: null, modelName: Elevation )
• BelowGrade ( type: esriFieldTypeInteger, alias: BelowGrade, editable: true, nullable: false, defaultValue: null, modelName: BelowGrade , Coded Values: [0: False] , [1: True] )
• Manufacturer ( type: esriFieldTypeString, alias: Manufacturer, editable: true, nullable: true, length: 20, defaultValue: null, modelName: Manufacturer , Coded Values: [UNK: Unknown] , [OTH: Other] )
• Diameter ( type: esriFieldTypeInteger, alias: Diameter, editable: true, nullable: true, defaultValue: null, modelName: Diameter , Coded Values: [0: 0 mm] , [10: 10 mm] , [20: 20 mm] , ...69 more... )
• JointType1 ( type: esriFieldTypeString, alias: JointType1, editable: true, nullable: true, length: 20, defaultValue: null, modelName: JointType1 , Coded Values: [Flange: Flange] , [Weld: Weld] , [Bond: Bond] , ...5 more... )
• JointType2 ( type: esriFieldTypeString, alias: JointType2, editable: true, nullable: true, length: 20, defaultValue: null, modelName: JointType2 , Coded Values: [Flange: Flange] , [Weld: Weld] , [Bond: Bond] , ...5 more... )
• GroundType ( type: esriFieldTypeString, alias: GroundType, editable: true, nullable: true, length: 20, defaultValue: null, modelName: GroundType , Coded Values: [UNK: Unknown] , [OTH: Other] , [D: Dirt] , ...3 more... )
• CurrentPosition ( type: esriFieldTypeString, alias: CurrentPosition, editable: true, nullable: true, length: 20, defaultValue: null, modelName: CurrentPosition , Coded Values: [UNK: Unknown] , [OPEN: Open] , [OPIO: Open Inoperable] , ...4 more... )
• InspectionGroup ( type: esriFieldTypeString, alias: InspectionGroup, editable: true, nullable: true, length: 20, defaultValue: null, modelName: InspectionGroup , Coded Values: [UNK: Unknown] , [OTH: Other] )
• InspectionSequence ( type: esriFieldTypeString, alias: InspectionSequence, editable: true, nullable: true, length: 20, defaultValue: null, modelName: InspectionSequence , Coded Values: [UNK: Unknown] , [OTH: Other] )
• Model ( type: esriFieldTypeString, alias: Model, editable: true, nullable: true, length: 20, defaultValue: null, modelName: Model )
• PressureSetting ( type: esriFieldTypeInteger, alias: PressureSetting, editable: true, nullable: true, defaultValue: null, modelName: PressureSetting , Range: [0, 2000] )
• NormalPressure ( type: esriFieldTypeInteger, alias: NormalPressure, editable: true, nullable: true, defaultValue: null, modelName: NormalPressure , Range: [0, 2000] )
• HazardType ( type: esriFieldTypeString, alias: HazardType, editable: true, nullable: true, length: 20, defaultValue: null, modelName: HazardType , Coded Values: [UNK: Unknown] , [OTH: Other] , [PHOTO: Photo Chemicals] , ...4 more... )
• MeterNumber ( type: esriFieldTypeString, alias: MeterNumber, editable: true, nullable: true, length: 20, defaultValue: null, modelName: MeterNumber )
• GlobalID ( type: esriFieldTypeGlobalID, alias: GlobalID, editable: false, nullable: false, length: 38, defaultValue: null, modelName: GlobalID )

Templates:

• Name: Sanitary Control Valve
  Description:
  Prototype:
  AssetID: null
  Elevation: null
  HazardType: null
  LifeCycleStatus: ACT
  MeterNumber: null
  SubType: 10
  AssetOwner: null
  AssetManager: null
  Location: null
  InstallDate: null
  WaterType: null
  BelowGrade: 0
  Manufacturer: null
  Diameter: null
  JointType1: null
  JointType2: null
  GroundType: null
  CurrentPosition: null
  InspectionGroup: null
  InspectionSequence: null
  Model: null
  PressureSetting: null
  NormalPressure: null
  
  Drawing Tool: esriFeatureEditToolPoint

Capabilities: Query,Extract,ChangeTracking

Sync Can Return Changes: true

Is Data Versioned: true

Supports Rollback On Failure: false

Supports ApplyEdits With Global Ids: true

Supports OidReservation: true

Edit Fields Info:

• Creation Date Field: created_date
• Creator Field: created_user
• Edit Date Field: last_edited_date
• Editor Field: last_edited_user

Supports Query With Historic Moment: true

Supports Coordinates Quantization: true

Child Resources:   Field Groups   Contingent Values

Supported Operations:   Query   Validate SQL   Generate Renderer   Return Updates   Iteminfo   Thumbnail   Metadata   Update Metadata